Events

Recall of Leksell Gamma Knife C

According to U.S. Food and Drug Administration, this recall involved a device in United States that was produced by Elekta, Inc..

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    55148
  • Event Risk Class
    Class 2
  • Event Number
    Z-1429-2010
  • Event Initiated Date
    2006-08-01
  • Event Date Posted
    2010-04-22
  • Event Status
    Terminated
  • Event Country
    United States
  • Event Terminated Date
    2010-12-14
  • Event Source
    USFDA
  • Event Source URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=90081
  • Notes / Alerts
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Extra notes in the data
    Radionuclide radiation therapy system - Product Code IWB
  • Reason
    Due to a material change in a critical component of the linear actuators the quality of said part was found to be inadequate.
  • Action
    Phase 1 - Technical Notes Leksell Gamma Knife C version 1.2 (dated August 2006) "Potential Problem with Error Handling" was sent to all users. Phase 2 - Mandatory Field Action 0000748, "Helmet Changer Actuator, MTB and MCU SW Upgrade Kit was released December 3, 2007. This Field Change Order includes two mod kits and a software upgrade to provide a permanent solution to the issues. Phase 3 - Technical Note 200 068, "Safety issue with helmet host actuator", released on May 15, 2008. This Technical Note includes a warning to customers of a potential quality problem with the helmet hoist actuator that is installed in the Leksell Gamma Knife. Phase 4 - Mandatory Field Action 200 067, "Investigation and Correction of Helmet Changer Actuators", released on May 15, 2008. This FCO includes a list of user machines which must be monitored for quality issues and provides a solution for replacement of parts should a deficiency be detected. Phase 5 - Mandatory Field Action 200 075, "Helmet Changer Actuator, MTB and MCU SW upgrade, release two", released on September 16, 2008. This FCO applies to machines within specific serial number ranges. Due to a material change in FCO-0000748 and baselines (conducted without notice by the manufacturer) the quality of said part was found to be inadequate. After reversing the material change, FCO 200 075 is released to update the installed base with the new type of actuator and to finish the remaining sites never or partially updated by the now superseded FCO-0000748. For further information, contact Elekta R&D; Jonas Hallstensson on phone no. +46 709 843 553 or via e-mail jonas.hallstensson AT elekta.com.

Device

Leksell Gamma Knife C
  • Model / Serial
    4148, 4207, 4214, 4300, 4302, 4303, 4306, 4307, 4308, 4309, 4313, 4314, 4315, 4318, 4319, 4321, 4322, 4326, 4327, 4328, 4329, 4332, 4333, 4334, 4337, 4338, 4339, 4340, 4341, 4342, 4343, 4344, 4346, 4351, 4352, 4353, 4354, 4357, 4363, 4365, 4366, 5000, 5003, 5006, 5009, 5010, 5018, 5019, 5022, 5023, 5026
  • Product Classification
    Radiology Devices
  • Device Class
    2
  • Implanted device?
    No
  • Distribution
    AL, CA, CO, CT, FL, GA, IL, MD, MA, MI, MN, MO, NE, NY, NC, OH, OK, OR, PA, TN, TX, VA, WA
  • Product Description
    Leksell Gamma Knife C
  • Manufacturer
    Elekta, Inc.

Manufacturer

Elekta, Inc.
  • Manufacturer Address
    Elekta, Inc., 4775 Peachtree Industrial Blvd, Bldg 300, #300, Norcross GA 30092-3011
  • Manufacturer Parent Company (2017)
    Elekta AB
  • Source
    USFDA