Recall of GE Precision and Advantx Legacy/Legacy-D Radiographic and Fluroscopic Systems

According to New Zealand Medicines and Medical Devices Safety Authority, this recall involved a device in New Zealand that was produced by GE Medical Systems LLC.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    18755
  • Event Initiated Date
    2015-06-29
  • Event Country
  • Event Source
    NZMMDSA
  • Event Source URL
  • Notes / Alerts
    Data from New Zealand is current through July 2018. All of the data comes from the New Zealand Medicines and Medical Devices Safety Authority, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and New Zealand.
  • Extra notes in the data
    Recalling Organisation: GE Healthcare Limited, 8 Tangihua Street, Auckland 1010
  • Reason
    The spot film device (sfd) or intelegent digital device (idd) safety mechanism installed on the system may not engage properly at the lower range of sfd/idd travel. this mechanism is installed to hold and prevent the sfd/idd from falling due to a counterweight cable failure. the lower range of travel is 1.1" (28mm) from the lowest point of normal sfd/idd vertical compression. a fall of the sfd/idd could result in an injury to a patient or operator. there have been no reported injuries as a result of this issue.
  • Action
    Product to be modified

Device

Manufacturer