Impac Medical Systems Inc

MOSAIQ versions 1.30 and 1.40 with Elekta iCom or Siemens DMIP

Radiology Devices

2

No

Worldwide Distribution --- USA including states of OH, OK, NJ, MN, OR, TN, NY, CA, AZ, NV, IA, GA, AL, MD, MI, PA, IN, WA, FL, TX, CO, and countries to Canada, Australia, Germany, Greece and Sweden.

SEQUENCER, MOSAIQ versions 1.3 and 1.4 with Elekta and Siemens Machines, Model number 40003-001000-RO, Manufactured by IMPAC Medical Systems, Sunnyvale, CA. || Used to facilitate the delivery of defined radiotherapy treatment plans.

MOSAIQ version 1.30 (all builds), MOSAIQ version 1.40 (all builds), MOSAIQ version 1.50 (all builds), MOSAIQ version 1.60 (all builds, and MOSAIQ version 2.0 (all builds).

Radiology Devices

2

No

Worldwide Distribution - USA including AL, CA, CT, FL, GA, IA, IL, KY, MI, MN, MS, ND, NJ, OH, OR, PA,TN, TX, VA, WA, WI, and WV and the country of Canada.

SEQUENCER component of MOSAIQ versions 1.30 (all builds), 1.40 (all builds), 1.50 (all builds), 1.60 (all builds), and 2.0 (all builds). Manufactured by IMPAC Medical Systems, Inc. Sunnyvale, CA. || The intended use of SEQUENCER (a verification system) is to assist in the process of patient treatment on a radiotherapy treatment machine. SEQUENCER provides the capability to notify the users of actions that need to take place prior to treatment, to display reference images for set up purposes, and to auto setup the machine to predefined settings. Actual settings are read from the treatment machine, via the machine's communication interface, and compared to the predefined values. If a mismatch occurs between the planned values and the actual machine settings, treatment is prohibited. At appropriate times during the treatment, the actual delivered values are recorded to provide treatment tracking. Treatments are initiated by the operator, via the machine control system, only after the user has verified that the treatment setup is correct. SEQUENCER does not bypass any checks put in place by the machine's control system.

Sequencer for MOSAIQ versions: 1.20, 1.30 ; 1.50 , 1.60 and 2.00, interfacing to an Elekta SL 75-5 Linacs.

Radiology Devices

2

No

Worldwide Distribution -- US, Canada, Germany, and France.

SEQUENCER for Mosaiq interfaced to Electa SL75-5 machines. || Sequencer Verify and Record System is to assist in the process of patient treatment on a radiotherapy treatment machine with software control.

Sequencer for MOSAIQ 1.60W3 (including all service packs), 2.00T2 (inclusing all service packs), 2.10L5 (including all service packs) and 2.10M7 (including all service packs).

Radiology Devices

2

No

Worldwide Distribution -- USA, Australia, Belgium, France, Germany, Hong Kong, Ireland, Israel, and Italy

Elekta Impac Software Sequencer Verify & Record System, for MOSAIQ, manufactured by Elekta Impac Software, Sunnyvale, CA. || The intended use of Sequencer (generically referred to as a verification system) is to assist in the process of process of patient treatment on a radiotherapy treatment machine.

MOSAIQ 1.30, 1.60, 2.00, 2.10, and 2.20; including all service packs.

Radiology Devices

2

No

Worldwide distribution: USA (nationwide) and country of Canada.

Elekta Impac Software Sequencer Verify & Record System, for MOSAIQ || The intended use of Sequencer (generically referred to as a verification system) is to assist in the process of process of patient treatment on a radiotherapy treatment machine. It gives the capability to notify users of actions that need to take place prior to treatment, to display reference images for set up purposes and to auto setup the machine to predefined settings.