Events

Recall of Device Recall Synthes

According to U.S. Food and Drug Administration, this recall involved a device in United States that was produced by Synthes USA HQ, Inc..

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    65561
  • Event Risk Class
    Class 2
  • Event Number
    Z-1745-2013
  • Event Initiated Date
    2013-05-31
  • Event Date Posted
    2013-07-17
  • Event Status
    Terminated
  • Event Country
    United States
  • Event Terminated Date
    2015-08-31
  • Event Source
    USFDA
  • Event Source URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=119576
  • Notes / Alerts
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Extra notes in the data
    Screw, fixation, intraosseous - Product Code DZL
  • Reason
    Synthes is initiating a voluntary medical device removal for specified part numbers and lot numbers of the mutis vector distractor pin holding clamp, limited bone stock. the firm received complaints that the clamp and nut construct would not engage the distractor arm threads and subsequently bind. it is not likely that a serious adverse event will result due to a nonconforming clamp, however there.
  • Action
    Synthes sent a Urgent Notice: Medical Device Removal letter dated May 31, 2013, to all affected customers. The letter identified the product the problem and the action needed to be taken by the customers. The firm received complaints that the clamp and nut construct would not engage the distractor arm threads and subsequently bind. It is not likely that a serious adverse event will result due to a nonconforming clamp, however, there is a remote potential that additional intervention would be required due to a non-functioning clamp. Synthes requested the product to be removed from inventory and returned to Synthes by calling 1-800-479-6329 to obtain a Return Authorization Number. Direct Accounts were asked to complete and return the Verification Section at the end of the letter indicating the quantity of affected product was found. Negative responses were also requested. If you have any questions please call (610) 719-5450.

Device

Device Recall Synthes
  • Model / Serial
    Titanium Multi Vector Distractor Pin Holding Clamp, body, limited bone stock Part # 487.941 with lot numbers: 3769720, 3779569, 3788731, 3794434, 7806093, 7823463 and Titanium Multi Vector Distractor Pin Holding Clamp, ramus, limited bone stock Part # 487.942 with lot numbers: 3769706, 3779571, 3788741, 7806096, 7823464.
  • Product Classification
    Dental Devices
  • Device Class
    2
  • Implanted device?
    Yes
  • Distribution
    US Nationwide Distribution including the states of MA, TX, MN, SC, UT, VA, and NY.
  • Product Description
    Multi Vector Distractor Pin Holding Clamp, limited bone stock || The holding clamp is part of the Multi Vector Distractor which cis used for mandibular bone lengthening, including conditions such as congenital mandibular deficiencies or post-traumatic defects. The Multi Vector Distractor can be utilized to perform bone transport procedures as an alternative to bone grafts and free flaps.
  • Manufacturer
    Synthes USA HQ, Inc.

Manufacturer

Synthes USA HQ, Inc.
  • Manufacturer Address
    Synthes USA HQ, Inc., 1302 Wrights Ln E, West Chester PA 19380-3417
  • Manufacturer Parent Company (2017)
    Johnson & Johnson
  • Source
    USFDA