Events

Recall of Device Recall CS 100i IntraAortic Balloon Pump

According to U.S. Food and Drug Administration, this recall involved a device in United States that was produced by Maquet Datascope Corp - Cardiac Assist Division.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    77566
  • Event Risk Class
    Class 1
  • Event Number
    Z-2736-2017
  • Event Initiated Date
    2017-06-16
  • Event Date Posted
    2017-06-23
  • Event Status
    Open, Classified
  • Event Country
    United States
  • Event Source
    USFDA
  • Event Source URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=156533
  • Notes / Alerts
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Extra notes in the data
    System, balloon, intra-aortic and control - Product Code DSP
  • Reason
    The device failed to pump due to an electrical test failure code #58 (power up vent test fail), maintenance code #3, and an autofill failure which has been associated to a patient death due to the failure of the device to initiate therapy.
  • Action
    Datascope Corp/MAQUET issued a press release on June 16, 2017. Datascope Corp/MAQUET sent an Urgent Product Recall Letter on June 19, 2017, to their customers via FedEx next day delivery service. Pursuant to the WARNINGS section of our CS100i, CS100 or CS300 IABP Operating/User Instructions, clinicians are instructed not to leave the patient unattended during IABP therapy. Until the service is performed, we recommend the IABP be powered on prior to initiation of therapy to allow the IABP to successfully complete its self-test. This action will take less than 60 seconds to perform. In the event the IABP fails to successfully complete the self-test and exhibits electrical test failure code 58, please remove the IABP from service and contact your local Maquet/Getinge Sales & Service Office. Customers will be instructed to complete and return the attached Medical Device Field Correction Response Form via fax to 1-973-807-9217 or send via email to IABP2017@getinge.com.ABP2017@getinge.com. If you are a distributor who has shipped any affected products to customers, please forward this document to their attention for appropriate action. For U.S. customers with technical questions, please contact our Technical Support Department (at 1-888-627-8383 and press 3), Monday through Friday, between the hours of 8:00 a.m. and 6:00 p.m. EST

Device

Device Recall CS 100i IntraAortic Balloon Pump

Manufacturer

Maquet Datascope Corp - Cardiac Assist Division
  • Manufacturer Address
    Maquet Datascope Corp - Cardiac Assist Division, 1300 Macarthur Blvd, Mahwah NJ 07430-2052
  • Manufacturer Parent Company (2017)
    Getinge AB
  • Source
    USFDA