Events

Recall of Device Recall Biomerieux

According to U.S. Food and Drug Administration, this recall involved a device in United States that was produced by BioMerieux SA.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    80111
  • Event Risk Class
    Class 2
  • Event Number
    Z-2167-2018
  • Event Initiated Date
    2018-03-23
  • Event Status
    Open, Classified
  • Event Country
    United States
  • Event Source
    USFDA
  • Event Source URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=164581
  • Notes / Alerts
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Extra notes in the data
    System, test, automated, antimicrobial susceptibility, short incubation - Product Code LON
  • Reason
    A shipment to guadeloupe suffered a temperature excursions up to 47.8¿c, exceeding the acceptable limits. after detection of the issue, global supply chain qa asked the biom¿rieux distributor in guadeloupe to put products in quarantine in july 2017; after several reminders, the distributor informed in november 2017 that products were delivered to customers.
  • Action
    The firm, Biomerieux, sent an "Urgent product removal notice" letter on April 23 to affected customers. The letter described the product, problem and actions to be taken. The customers were instructed to do the following: 1. Immediately acknowledge receipt (AR) of this FSCA. 2. Identify all countries and customers for which you are responsible that are impacted by this FSCA. 3. Define additional actions required (e.g. Translate customer letter, send to impacted countries/customers, etc.) 4. Distribute the customer letter to all customers that have received the products 5. Discard any impacted product remaining in local inventory 6. After all actions above are complete, please return the acknowledgement of completion (AC) for this FSCA. The due date for completion of the required actions and submitting the AC is 23-APR-2018 Subsidiaries ¿ Subsidiaries using SAP, please manage both the Acknowledgment of Receipt and the Acknowledgment of Completion of activities in SAP. ¿ Subsidiaries not using SAP, please immediately upload the Acknowledgement of Receipt in LiveLink after signing and completing sections #1 and #2. Section #3 must be signed, completed and uploaded in LiveLink before the due date. Distributors ¿ Please immediately Acknowledge Receipt of this FSCA by completing sections #1 and #2 of the acknowledgement form and sending it by email to fieldactions@biomerieux.com or by fax to +33 4 78 87 21 79. Please remember to sign and complete all of sections #1 and #2. ¿ Sections #1 and #3 must be signed, completed, faxed or emailed before the due date. If you have any questions, contact the Specialist, Regulatory & Quality Compliance at +33 4 78 87 56 16 or email to: charlotte.thollet@ext.biomerieux.com.

Device

Device Recall Biomerieux
  • Model / Serial
    VITEK¿ 2 AST-P606 (ref: 22330): Lot Number 4860117403
  • Product Classification
    Immunology and Microbiology Devices
  • Device Class
    2
  • Implanted device?
    No
  • Distribution
    International distribution.
  • Product Description
    The VITEK¿ 2 Gram Positive Susceptibility Card is intended for use with the VITEK 2 Systems in clinical laboratories as an in vitro test to determine the susceptibility of Staphylococcus spp., Enterococcus spp., and S. agalactiae to antimicrobial agents. || Fully automated short-term incubation cycle antimicrobial susceptibility system is a device that incorporates concentrations of antimicrobial agents into a system for the purpose of determining in vitro susceptibility of bacterial pathogens isolated from clinical specimens. Test results obtained from short-term (less than 16 hours) incubation are used to determine the antimicrobial agent of choice to treat bacterial diseases.
  • Manufacturer
    BioMerieux SA

Manufacturer

BioMerieux SA
  • Manufacturer Address
    BioMerieux SA, Chemin De L'Orme, Marcy L'Etoile France
  • Manufacturer Parent Company (2017)
    Compagnie Merieux Alliance
  • Source
    USFDA