Events

Recall of Device Recall ADVIA 120

According to U.S. Food and Drug Administration, this recall involved a device in United States that was produced by Siemens Healthcare Diagnostics.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    65852
  • Event Risk Class
    Class 2
  • Event Number
    Z-2114-2013
  • Event Initiated Date
    2013-06-26
  • Event Date Posted
    2013-08-28
  • Event Status
    Terminated
  • Event Country
    United States
  • Event Terminated Date
    2017-02-28
  • Event Source
    USFDA
  • Event Source URL
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=120549
  • Notes / Alerts
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Extra notes in the data
    Counter, cell, automated (particle counter) - Product Code GKL
  • Reason
    The advia 120 optics cover or hood is located on the very top of the advia 120 analyzer. when the optics cover is raised, it is supported by two gas struts (smn 10309266) attached to the cover on the left and right sides. over time, it is possible that these struts may lose their effectiveness and fail to support the optics cover in the open position. this could cause the cover to fall during maintenance procedures.
  • Action
    Siemens sent an Urgent Device Correction Letter dated June 26, 2013, to all affected customers. The letter identified the product the problem and the action needed to be taken by the customer. Customers were instructed of the ADVIA 120 system displays a problem when raising and supporting the optics cover, immediately contact your service provider to arrange to have the cover struts serviced. If the optics cover will not stay in the up position, as required, do not perform maintenance procedures on the optics area until the hood struts have been replaced. Siemens field support will be proactively replacing the optics cover hood struts on a regular preventive maintenance cycle based on the age of the system. Please forward this notification to whomever you may have distributed this product We apologize for the inconvenience that this situation has caused. Thank you for your patience and continued support. This response form is to confirm receipt of the enclosed Siemens Healthcare Diagnostics Urgent Device Correction dated June 2013 regarding Optics Cover Struts (SMN 10309266). Please read each question and indicate the appropriate answer. Fax this completed form to Siemens Healthcare diagnostics at the fax number indicated at the bottom of this page. PLEASE FAX THIS COMPLETED FORM TO THE TECHNICAL SOLUTIONS CENTER AT (302) 631-7597.

Device

Device Recall ADVIA 120
  • Model / Serial
    All serial numbers
  • Product Classification
    Hematology and Pathology Devices
  • Device Class
    2
  • Implanted device?
    No
  • Distribution
    Worldwide Distribution - USA (nationwide) and the countries of Austria, Australia, Belgium, Bosnia - Herzegovina, China, Croatia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Greece, Hungary, Iceland, India, Indonesia, Ireland, Iraq, Israel, Italy, Japan, Kenya, Republic of Korea, Kuwait, Lebanon, Lithuania, Luxembourg, Martinique, Malaysia, Netherlands, Norway, New Zealand, Philippines, Poland, Portugal, Romania, Russian Republic, Saudi Arabia, Serbia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, Ukraine, United Arab Emirates, United Kingdom and Vietnam.
  • Product Description
    ADVIA 120 Hematology Analyzer, Catalog Numbers SMN 10360958 and 10360959 . || The ADVIA 120 is a hematology system that utilizes the principles of flow cytometry in order to provide complete blood counts.
  • Manufacturer
    Siemens Healthcare Diagnostics

Manufacturer

Siemens Healthcare Diagnostics
  • Manufacturer Address
    Siemens Healthcare Diagnostics, 511 Benedict Ave, Tarrytown NY 10591-5005
  • Source
    USFDA