Recall of Siemens syngo RT Therapist COHERENCE RTT Application Software

According to New Zealand Medicines and Medical Devices Safety Authority, this recall involved a device in New Zealand that was produced by Siemens AG.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    20518
  • Event Initiated Date
    2016-08-17
  • Event Country
  • Event Source
    NZMMDSA
  • Event Source URL
  • Notes / Alerts
    Data from New Zealand is current through July 2018. All of the data comes from the New Zealand Medicines and Medical Devices Safety Authority, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and New Zealand.
  • Extra notes in the data
    Recalling Organisation: Siemens Healthcare (NZ) Ltd, Millennium Centre, Part Level 2, Building A, 600 Great South Road, Ellerslie, AUCKLAND 1051
  • Reason
    New software update that addresses multiple issues including an issue communicated earlier:, 1. incorrect isocenter assignment when using multiple treatment plans with different isocenters based on one single planning ct and when a cbct has been acquired for each isocenter, 2.When auto field-sequencing (afs) is selected the pause is no longer present when treating a plan containing at least two beams with different isocentric table angles, 3. table movement due to different isocenters in imaging beams and treatment beams, 4. reference image has been associated to the wrong patient, 5.Incorrect calculated isocenter shift when using late resumption after interruption after beam 1 has been completed, 6.Multiple isocenter in session resumption f1 abort workflow is incorrect, 7. irrevocable assignment of the first reference 2d image, 8. after reverting plan changes in ois mosaiq changes performed on rt therapisttm become inactive.
  • Action
    Software to be upgraded

Device

  • Model / Serial
    Model: , Affected: , Software version: 4.2.110 or 4.3.SP1 or 4.3.138 or 4.3.1_AR1 or 4.3.1_MR2 in combination with Oncology Information System ARIA (by VARIAN) or MOSAIQ (by ELEKTA Inc.)
  • Manufacturer

Manufacturer

  • Manufacturer Parent Company (2017)
  • Source
    NZMMDSA