Safety Alert for EMPIRA NC RX PTCA Dilatation Catheter and EMPIRA RX PTCA Dilatation Catheter

According to Department of Health, this safety alert involved a device in Hong Kong that was produced by Creganna-Tactx Medical.

What is this?

Alerts provide important information and recommendations about products. Even though an alert has been issued, it does not necessarily mean a product is considered to be unsafe. Safety Alerts, addressed to health workers and users, may include recalls. They can be written by manufacturers, but also by health officials.

Learn more about the data here
  • Type of Event
    Safety alert
  • Date
    2014-06-25
  • Event Date Posted
    2014-06-25
  • Event Country
  • Event Source
    DH
  • Event Source URL
  • Notes / Alerts
    Hong Kong data is current through September 2018. All of the data comes from the Department of Health (Hong Kong), except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Hong Kong.
  • Extra notes in the data
    Medical Device Safety Alert
  • Reason
    Medical device safety alert: creganna-tactx / cordis empira nc rx ptca dilatation catheter and empira rx ptca dilatation catheter medical device manufacturer, creganna-tactx medical, inc. (creganna-tactx) and the distributor, cordis corporation, inc. (cordis) have issued a medical device safety alert concerning the empira nc rx ptca dilatation catheter (“75rxxyyyn”) and empira rx ptca dilatation catheter (“85rxxyyys”) [all catalog numbers and all unexpired lots]. through the investigation of a small number of complaints, cordis and creganna-tactx have observed that the balloon of the affected product, which is covered with a hydrophilic coating, may exhibit resistance to the removal of the balloon cover. weakening of the affected product in the region of the proximal balloon seal may occur when excessive force is applied to remove the balloon cover. use of a weakened catheter may lead to balloon burst, shaft separation or deflation difficulties, which could result in procedural delay, vessel trauma or surgery. the existing labeling in the instructions for use states, as part of the “preparation and inspection procedure”: “gently remove the shipping stylet along with the balloon cover from the catheter” and “store in a cool, dry, dark place”. in addition to the existing labeling, users are advised about the ifu updates and they should follow the following instructions: if unusual resistance is felt during the removal of the shipping stylet and/or balloon cover, do not use this product and replace it with another product.” excessive force may damage the balloon region of the catheter. it is known that balloons with hydrophilic coating are susceptible to expansion of the coating at extremely elevated humidity. therefore, it is important to follow the current labeling, to store the product in a cool, dark and dry place. according to the local supplier, the affected products were distributed in hong kong. if you are in possession of the affected products, please contact your supplier for necessary actions. posted on 25 jun 2014.

Device

  • Model / Serial
  • Product Description
    Medical Device Safety Alert: Creganna-Tactx / Cordis EMPIRA NC RX PTCA Dilatation Catheter and EMPIRA RX PTCA Dilatation Catheter
  • Manufacturer

Manufacturer