Recall of Atrium Trocar Catheters, Sizes 8Fr to 32FrProduct Code Numbers: 8408, 8410, 8412, 8416, 8420, 8424, 8428, 8432

According to Department of Health, Therapeutic Goods Administration, this recall involved a device in Australia that was produced by Maquet Australia Pty Ltd.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    RC-2016-RN-01419-1
  • Event Risk Class
    Class II
  • Event Initiated Date
    2016-11-02
  • Event Country
  • Event Source
    DHTGA
  • Event Source URL
  • Notes / Alerts
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Extra notes in the data
  • Reason
    It has been identified that atrium trocar catheters are packaged with a label containing an icon that shows more holes (eyelets) than the product actually contains. this graphical icon shows there are 6 side holes on the trocar catheter; however, the correct number of eyelets on the trocar catheter is 2 side holes.To date, atrium has received two complaints of insufficient drainage, with injury, as a result of selecting trocar catheters that had fewer eyelets than displayed on the product label. although the use of a trocar catheter with two eyelets may be effective in most patients, the potential risks related to use of the trocar catheter with 2 eyelets are: incomplete drainage of pleural effusion or pneumothorax, the need for repeat chest tube or pleural drain insertion, and surgical site infection.
  • Action
    Maquet is advising customers to remove affected product from supply/inventory and place in quarantine. All sterile and un-used affected products are to be returned to Maquet for credit. Replacement product is not available as all Trocar Catheters have been discontinued however Maquet is providing information to customers about substitute product from alternative suppliers. This action has been closed-out on 25/05/2017.

Device

  • Model / Serial
    Atrium Trocar Catheters, Sizes 8Fr to 32FrProduct Code Numbers: 8408, 8410, 8412, 8416, 8420, 8424, 8428, 8432All lot numbersARTG Number: 97358
  • Manufacturer

Manufacturer

  • Manufacturer Parent Company (2017)
  • Source
    DHTGA