Recall of Acetaminophen (Paracetamol) Reagent (used with L3K Assay in conjunction with the Architect cSystem Analyser). An in vitro diagnostic medical device (IVD)

According to Department of Health, Therapeutic Goods Administration, this recall involved a device in Australia that was produced by Abbott Australasia Pty Ltd Diagnostic Division.

What is this?

A correction or removal action taken by a manufacturer to address a problem with a medical device. Recalls occur when a medical device is defective, when it could be a risk to health, or when it is both defective and a risk to health.

Learn more about the data here
  • Type of Event
    Recall
  • Event ID
    RC-2016-RN-00112-1
  • Event Risk Class
    Class II
  • Event Initiated Date
    2016-01-28
  • Event Country
  • Event Source
    DHTGA
  • Event Source URL
  • Notes / Alerts
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Extra notes in the data
  • Reason
    The manufacturer, sekisui has investigated complaints related to the formation of crystals in the r2 reagent and/or shift of controls when left on board an automated analyser. during the investigation, it was determined that when the r2 reagent is exposed to the atmosphere for prolonged periods of time, on board an automated analyser, crystals may form. sekisui has identified the crystals form from a standard component of the reagent. the amount of time to crystalise is dependent on reagent usage, temperature, and length of time on board the analyser. abbott internal testing has shown that the crystal formation does not impact architect csystem instrument performance.
  • Action
    Abbott is advising users to only leave the reagent on board the analyser for a maximum of 8 days and has decreased the calibration interval to 24 hours. Additionally, Abbott is reducing the shelf life for all affected batches to nine (9) months. Any reagent with an expiry date of 09-2016 should be discarded and the expiry dates for other affected batches amended. Abbott is advising users there is no requirement to review previously generated results. This action has been closed-out on 03/02/2017.

Device

  • Model / Serial
    Acetaminophen (Paracetamol) Reagent (used with L3K Assay in conjunction with the Architect cSystem Analyser). An in vitro diagnostic medical device (IVD)Sekisui List Numbers: 506-10 and 506-30Abbott List Number: 3R11-20Multiple lot numbers and expiry datesARTG Number: 224545
  • Manufacturer

Manufacturer

  • Manufacturer Parent Company (2017)
  • Manufacturer comment
    “We are in constant communication with regulatory agencies and competent authorities worldwide which allows us to implement global recalls or in-country communication quickly and effectively,” Abbott, which now owns St. Jude Medical told ICIJ in a statement. In addition to sending global notices to physicians worldwide, we also make sure that product advisories are available online and classification of product recalls and product advisories are determined by global regulatory bodies which can impact the timing in any given country. MD companies follow varying regulations in different countries. In come countries software is not regulated so a recall in one country related to software would not be classified as a recall or field action in another. In addition, review cycles within the regulatory process can be different in each country which can impact communication and recall timing.
  • Source
    DHTGA